跳至內容
WICRESETPRO印表機診斷、重設與維修PRO — Print Reset Online
ZH-HANT
購物車 0購買金鑰

CANON · 維修準備

Canon 維修模式

查詢適用於您確切型號的 Canon 印表機的維修模式操作程序。進入維修模式是為印表機做好準備；這並不會重設廢墨計數器。

需要 USB 連線 · 請依照該型號指定的按鍵與按壓次數操作。

Canon 印表機目錄 · USB 維修程序。各型號的選項分別列出。

開啟完整的印表機查找器 ↗

All steps are available below without JavaScript. Service-mode documentation and reset support are recorded separately. A missing instruction does not change confirmed reset support.

STOP and POWER — 5 presses of STOP · 353 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Alternative method

If the main sequence does not enter service mode, use this alternative assigned to your exact model.

POWER first — 5 presses of STOP

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold POWER. Wait until the indicator lights.
  3. While holding POWER, press and release STOP exactly 5 times.
  4. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 5 presses of STOP · 310 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
+ and POWER — 5 presses of STOP · 2 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold the + (plus) button.
  3. While holding +, press and hold POWER. Wait until the indicator lights.
  4. Release +. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 6 presses of STOP · 214 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 6 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 6 presses of STOP · 34 models

需要 USB 連線

This service-mode sequence is based on a related model and has not been separately verified for this printer.

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 6 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 5 presses of STOP · 161 models

需要 USB 連線

This service-mode sequence is based on a related model and has not been separately verified for this printer.

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 2 presses of STOP · 164 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 2 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 2 presses of STOP · 5 models

需要 USB 連線

This service-mode sequence is based on a related model and has not been separately verified for this printer.

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 2 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
Resolve a conflicting button sequence · 13 models

需要 USB 連線

The available instructions disagree about this model’s button sequence. Contact support before attempting service mode. Do not use another model’s sequence.

Models in this section
Touch panel — POWER first, 6 taps on STOP · 10 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold POWER. Wait until the power indicator lights.
  3. While holding POWER, tap and release the STOP touch area exactly 6 times.
  4. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
Touch panel — STOP first, 6 taps on STOP · 9 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold the STOP touch area on the panel, where its symbol normally appears.
  3. While holding the STOP touch area, press and hold POWER.
  4. Release the STOP touch area. Keep holding POWER.
  5. While holding POWER, tap and release the STOP touch area exactly 6 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
Touch panel — STOP first, 6 taps on STOP · 1 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold the STOP touch area on the panel, where its symbol normally appears.
  3. While holding the STOP touch area, press and hold POWER.
  4. Release the STOP touch area. Keep holding POWER.
  5. Keep holding POWER and wait 5 to 10 seconds.
  6. While holding POWER, tap and release the STOP touch area exactly 6 times.
  7. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
STOP and POWER — 5 presses of STOP · 64 models

需要 USB 連線

This service-mode sequence is based on a related model and has not been separately verified for this printer.

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Alternative method

If the main sequence does not enter service mode, use this alternative assigned to your exact model.

POWER first — 5 presses of STOP

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold POWER. Wait until the indicator lights.
  3. While holding POWER, press and release STOP exactly 5 times.
  4. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
HOME and POWER — 5 taps on STOP · 69 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold the HOME touch area in the upper-left corner of the unlit screen.
  3. While holding HOME, press and hold POWER.
  4. Release HOME. Keep holding POWER.
  5. While holding POWER, tap and release the STOP (Cancel) touch area in the upper-right corner of the screen exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
HOME and POWER — 5 taps on STOP · 34 models

需要 USB 連線

This service-mode sequence is based on a related model and has not been separately verified for this printer.

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold the HOME touch area in the upper-left corner of the unlit screen.
  3. While holding HOME, press and hold POWER.
  4. Release HOME. Keep holding POWER.
  5. While holding POWER, tap and release the STOP (Cancel) touch area in the upper-right corner of the screen exactly 5 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
HOME and POWER — 6 taps on STOP · 11 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold the HOME touch area in the upper-left corner of the unlit screen.
  3. While holding HOME, press and hold POWER.
  4. Release HOME. Keep holding POWER.
  5. While holding POWER, tap and release the STOP (Cancel) touch area in the upper-right corner of the screen exactly 6 times.
  6. Release POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
Find help for your exact model · 13 models

需要 USB 連線

A complete service-mode sequence for this exact model is not available. Contact support and do not use another model’s sequence.

Models in this section
STOP and POWER — 3 presses of STOP · 5 models

需要 USB 連線

Before you start

  • Connect the printer to your computer with a USB cable. Leave the power cable connected.
  • Finish any print jobs and close other programs using this printer.
  • POWER means the power button (ON). STOP means the stop or cancel control, also labelled RESET or RESUME/CANCEL.
  • Do not count the initial hold as a press. One press means pressing and then releasing the control.

Enter service mode

  1. Turn the printer off with POWER and wait until it has switched off.
  2. Press and hold STOP.
  3. While holding STOP, press and hold POWER. Wait until the indicator lights.
  4. Release STOP. Keep holding POWER.
  5. While holding POWER, press and release STOP 2 times. Press STOP a third time and keep it held.
  6. Release both STOP and POWER.

After entering service mode

  • Wait for the printer to finish starting. In WICRESETPRO, choose Find printers and check the connection.
  • Read the counters after entering service mode. Entering this mode does not reset the counters.

Keep the USB connection stable. Continue with the reset only after WICRESETPRO detects the printer in the required mode. If detection fails, stop and ask for help with your exact model.

Models in this section
  • Canon 50iEnter service mode

    Check available functions in the app before purchasing a reset key.

  • Canon 80iEnter service mode

    Check available functions in the app before purchasing a reset key.

  • Canon i70Enter service mode

    Check available functions in the app before purchasing a reset key.

  • Canon i80Enter service mode

    Check available functions in the app before purchasing a reset key.

  • Canon iP90Enter service mode

    Check available functions in the app before purchasing a reset key.

Use only the procedure assigned to your exact model. Shared series names do not establish an identical sequence.

Keep USB and power stable. A reset changes the electronic counter; it does not clean or replace the physical ink absorber. Service the absorber when needed.

下載 WICRESETPRO

Questions and answers

How do I enter service mode on my Canon printer?

Find your exact model in the instructions above. Follow only its documented sequence. If the source is incomplete or conflicting, ask support to verify it; do not try another model’s procedure.

Can WICRESETPRO fix Canon error 5B00 / 1700?

Read the complete message in its original context and the available counters. A supported waste ink reset addresses the relevant counter-limit condition. It does not repair paper-feed, cartridge or network faults; the same short code can mean something different on a network report.

Is Canon service mode safe to use?

Use the preparation for the exact Canon model and selected operation. Basic reset support is shown in Find Printer. Keep USB and power stable; service-mode entry itself does not reset a counter.

The printer does not enter service mode – what should I do?

Check the exact detected model, USB data cable and the preparation displayed by WICRESETPRO. If it differs from an older reference, save the message and ask support to resolve the difference. Do not try a different model’s button sequence.

Where can I get a Canon reset key for WICRESETPRO?

Use the current product page and package calculator for the price in your selected currency. Your order is available in My account. For payment, invoice or key questions, contact support with the order number.

一點協助。恢復列印。

需要協助嗎？我們隨時為您服務 24/7。

請透過電子郵件或 WhatsApp 聯絡我們的團隊。請附上訂單編號及印表機機型，以便我們迅速協助您。

只是先了解看看？歡迎在下單前詢問。
電子郵件支援 ↗wicreset@wicreset.infoWhatsApp 支援 ↗+48 884 867 771聯絡頁面 →